Os-engines FS72-a Manual do Utilizador Página 9
- Página / 21
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
16
THROTTLE LINKAGE
Before connecting the throttle to its servo,
make sure that the throttle arm and linkage
safely clear any adjacent part of the airframe
structure, etc., as the throttle is opened and
closed. Connect the linkage so that the throttle
is fully closed when the transmitter throttle
stick and its trim lever are at their lowest
settings and fully open when the throttle stick
is in its fully-open position. Carefully align the
appropriate holes in the throttle arm and servo
horn so that they move symmetrically and
smoothly through their full travel.
NEEDLE-VALVE EXTENSION
The needle-valve supplied with this engine is
designed to incorporate an extension so that,
when the engine is enclosed within the
fuselage, the needle-valve may be adjusted
from the outside. Cut a commercially available
rod to the required length, bend one end to an
L shape, insert it into needle's center hole and
secure it by tightening the set-screw in the
needle-valve knob with 1.5mm Allen key.
Needle Valve Extension Cable Set (Code No.
72200080) is available from O.S. as an
optional part.
Needle Valve Extension
Cable Set
1.5mm Allen key.
Set Screw
17
INSTALLING SILENCER
Apply silicone
sealant.
Exhaust
Header Pipe
Exhaust Header
Pipe Nuts
Screw the exhaust header pipe in the
cylinder head to the bottom and secure it
with the nut. (A short screw in depth may
damage the threads of the cylinder head
due to vibration.)
1.
Screw the silencer on the exhaust header
pipe more than 8mm (10 turns) and secure
it with the nut. (A short screw in depth may
break the silencer or header pipe due to
vibration.) The distance between silencer
and cylinder head can be adjusted by
approximately 7mm by screwing the silencer
on or out the header pipe. Adjust the
silencer position by rotating the silencer.
2.
3.
Apply silicone sealant to the threads to
prevent the silencer and header pipe from
loosening and leaking oil.
- CONTENTS 1
- WARNINGS 2
- NOTES WHEN APPLYING 4
- AN ELECTRIC STARTER 4
- ABOUT THE ENGINE 5
- ENGINE PARTS NAME 5
- BEFORE STARTING 6
- Electric 7
- 12-Volt lead-acid battery 7
- INSTALLATION 8
- INSTALLING SILENCER 9
- FUEL TANK & LINES 10
- PROPELLER 11
- GLOWPLUG 11
- MIXTURE CONTROLS 12
- STARTING 13
- Electric starter 14
- Make sure that the 14
- IDLE MIXTURE ADJUSTMENT 15
- CARE AND MAINTENANCE 16
- CAP SCREW SETS 18
- 10pcs./sets 18
- CARBURETOR EXPLODED VIEW 19
- CARBURETOR PARTS LIST 19
- THREE VIEW DRAWING 20
- TEL. (06) 6702-0225 21
- FAX. (06) 6704-2722 21
Manuais e produtos relacionados com Hardware Os-engines FS72-a
Hardware Os-engines FS81-a Manual do Utilizador
(21 páginas)
(21 páginas)
Hardware Os-engines FS-91 II FI Manual do Utilizador
(29 páginas)
(29 páginas)
Hardware Os-engines FS95V Manual do Utilizador
(21 páginas)
(21 páginas)
Hardware Os-engines FS110-a Manual do Utilizador
(21 páginas)
(21 páginas)
Hardware Os-engines FS-120S-E Manual do Utilizador
(13 páginas)
(13 páginas)
Hardware Os-engines FS-120S III Manual do Utilizador
(26 páginas)
(26 páginas)
Hardware Os-engines FS-200S Manual do Utilizador
(15 páginas)
(15 páginas)
Hardware Os-engines FS-200S-P Manual do Utilizador
(16 páginas)
(16 páginas)
Hardware Os-engines GF30 Manual do Utilizador
(4 páginas)
(4 páginas)
Hardware Os-engines GGT15 Manual do Utilizador
(4 páginas)
(4 páginas)
Hardware Os-engines GT55 Manual do Utilizador
(18 páginas)
(18 páginas)
Hardware Os-engines GT60 Manual do Utilizador
(4 páginas)
(4 páginas)
Hardware Os-engines IL-300 Manual do Utilizador
(18 páginas)
(18 páginas)
Hardware Os-engines R2101 Manual do Utilizador
(2 páginas)
(2 páginas)
Hardware Os-engines Rotary 49PI Manual do Utilizador
(24 páginas)
(24 páginas)
Acer DX241H manuály
Uživatelské manuály a uživatelské příručky pro Monitory Acer DX241H.
Poskytujeme 3 manuály pdf Acer DX241H ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais