Os-engines Rotary 49PI Type II Manual do Utilizador descarregar pdf (Página 10)

18

1/3

2/3

Attention to tank height

Approx. 15mm

Plug

(commercially available)

For carburetor

INSTALLATION OF THE ENGINE AND FUEL TANK

Use the engine mount supplied with the

engine to install the engine in the model.

Decide the installing position. Any direction

will do.

As short as possible

Set the fuel tank position so that carburetor

center line may locate at 1/3 from the tank

top when the model is placed horizontal.

Locate the fuel tank as close as to the

carburetor, or the fuel level difference will

affect the engine running when the model is

upward or downward.

19

120

3- 4.2

120

53

After deciding installing position and

direction, remove the engine mount from the

engine by removing three retaining screws.

Firmly bolt the engine’s radial mounting

flange to the model with 4mm or 3.5mm

screws and self-locking nuts.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comentários a estes Manuais

Sem comentários